STEP 7:

Measure openingsbetween posts and cut lattice panels to fit. Slide lattice panels into channels between posts. (You may want to spray a lubricant, such as silicone, to ease the process.) When panel is as low as it will go, tap it with a rubber mallet for a secure fit.

STEP 8:

Nail ridge poles (H) to sides of center posts (B). (The poles will extend 1 1/2 inches on each end.)

STEP 9:

Drape canvas over top of ridge poles and fasten to side strips (J) by wrapping canvas around the strips and then nailing them to the top side rails (F) with 6d box nails (or use screws for easy removal for cleaning, etc.).

More Summer Activities »