 |
Cosmic Crafts: Junkmobile
- Total Time Needed:
- 1 Hour
Drive the sturdy, smooth-riding Junkmobile around the neighborhood on regular collection days, or park beneath the Waste Shooter for a quick fill.
- Materials
-
- 4 plastic lids, cardboard liners removed (we used peanut butter jar lids)
- Axles: 2 bamboo skewers or wooden dowels, 1/8 inch thick and a few inches longer than your truck body is wide
- Hubcaps: 4 small plastic caps (we used soda caps)
- Axle guards: 1 toilet paper tube, cut in half lengthwise
- Body: 1 lidded plastic box (we used a wet-wipes box)
- Driver's cab: 2 paper fasteners and 1 plastic container (we used a Nestle's Quick container)
- Tools: craft knife, pushpin, pointy scissors, wire snips, tape
- Instructions
-
-
Wheels and hubcaps: Make a hole in the center of each wheel and hubcap. The skewer axles should fit through snugly. Using the same method, create two evenly spaced larger holes near the bottom of each long side of the box.
-
Push a lid and a cap onto the pointed end of a skewer. Thread the skewer through the holes and attach a second lid/cap pair on the other side, as shown. Trim the excess skewer with wire snips. Repeat for the second set of wheels. Rest the trimmed toilet tube halves over the axles so the truck's contents won't interrupt wheel movement. Tape them down.
-
Driver's cab: Trim the smaller plastic container so that it fits beneath the edge of the truck body. Pierce holes and use paper fasteners to attach the cab to the body.
-
- Find more about:
 |
from Disney family Community
Related Groups
-
- Homemade Holidays
- Join us as we share ideas for adding the homemade touch to every holiday!
-
- Crafting With Kids
- Get great ideas for fun and cute crafts to make with your kids.
|