 |
 |
Multitasking Bench, Goal & Carrier
- Total Time Needed:
- Afternoon Or Evening
This clever construction does triple duty for winter sports. It would also come in handy during a cutting-edge skate party.
- Materials
-
- Tape measure
- Carpenter's square
- Wood saw
- 2 by 10 board, cut to 6 feet long
- 2 by 4 board, cut to 6 feet long
- Drill with 1/8-inch and 1/2-inch bits
- Screwdriver
- 20 (2 1/2-inch) drywall screws
- Paint (optional)
- 4-foot length of nylon rope, at least 1/2 inch thick
- Instructions
-
-
Following the diagram, measure and cut the boards, drill 1/8-inch pilot holes, and assemble the bench. (Note: The corner holes on top should be at least 3 inches from the end so they don't overlap the side-rail screws.) Using the 1/2-inch bit, drill a hole about 2 inches from the bottom of each leg for the carrying rope.
Download measurements -
Paint the bench if desired. When it's dry, thread the rope through the holes from the outside. Cut it to a length that's comfortable for carrying and knot it securely.
-
- Find more about:
 |
 |
FamilyFun Magazine
FamilyFun Magazine 10 Issues for Only $12
|
|
|