 |
Lean-on-Me Multi-Media Holder
- Total Time Needed:
- Afternoon Or Evening
This freestanding shelf design employs gravity to keep your DVDs, CDs, or even books neat and accessible. Assembled from just three pieces, it makes a great starter project for aspiring young carpenters. You might also want to check out our Cache-and-Carry Multi-Media Holder.
- Materials
-
- 2-foot-long section of (1 by 6) pine board
- Saw
- Drill
- 1 5/8-inch drywall screws
- 100-grit sandpaper
- Primer
- Paint
- Instructions
-
-
Cut the following pieces from the 2-foot pine board:
16-inch shelf
6-inch end
2-inch leg -
In the shelf, drill six 1/8-inch holes for 1 5/8-inch drywall screws, as shown. Working with the pieces on edge, screw the leg and the end to the shelf. -
Use sandpaper to slightly round the edges of the wood. Then prime and paint the holder as you like. If you use more than one color, as we did, paint the pieces before you assemble them.
-
- Find more about:
 |
from Disney family Community
Related Groups
-
- Homemade Holidays
- Join us as we share ideas for adding the homemade touch to every holiday!
-
- Crafting With Kids
- Get great ideas for fun and cute crafts to make with your kids.
|