Boards needed:
Assembled rear leg sectionAssembled frame ends (H and D)
H -- Frame crosspiece (2" by 6" by 36-1/2")
F -- Front inner frame side (2" by 6" by 75")
• With a helper, lift up the rear leg section you constructed in Step 1. Place the back end of a frame end so the inner frame (H) is flush on top with the leg (B) and the outer frame (D) extends beside and above the leg (see photo). Sink two 2 1/2-inch decking screws from B into the end of H.
• Do the same with the other frame end. Position the frame crosspiece as illustrated and secure it with screws as well. Finally, screw the front inner frame (F) in position.
 |
| Click on the picture above to see a larger version of it. |
