Boards Needed:
A -- Front legs (2" by 8" by 58")• With your helper holding the structure upright, attach the front legs (A) to the inner frame (F) using one 2 1/2-inch decking screw, placed 3 1/2 inches in from the end of the leg. The top edge of each leg should be level with the top of the outer frame ends.
• Square the front legs by measuring diagonally. Adjust as needed, then secure each with a second decking screw, placed above or below the first. (Note: Be careful to place the screws as shown so they don't get in the way of bolts to be added later.)
 |
| Click on the picture above to see a larger version of it. |
