Boards needed:
S -- Puppet theater front/chalkboard (1/2 inch plywood, cut to 30" by 41")L -- Fixed shelf (1" by 8" by 38")
M -- 3 adjustable shelves (1" by 8" by 37 1/2")
• Square the legs on the puppet theater end by measuring diagonally. Position the plywood front (S)--painted with chalkboard paint, if desired--1 inch above floor level and secure with 2 1/2-inch decking screws (pre-drill with 1/8-inch bit) and finishing washers.
• Attach the fixed shelf (L) flush with the top edge of the plywood using four corner braces. Secure S to L with additional 2-inch decking screws and finishing washers.
• Attach two 2-foot shelf standards to the inside of each leg, insert 12 shelf supports, and place the three adjustable shelves (M) in position.
 |
| Click on the picture above to see a larger version of it. |
