Reindeer Hat
- Total Time Needed:
- Afternoon Or Evening
Your child will lead the pack in true Rudolph style with this cap whose fanciful antlers are made from a pair of basic knit gloves.
- Materials
-
- Brown fleece (You'll need a piece that's 15 inches long and wide enough to fit around your child's head. See Snowman Hat materials list for details.)
- Ruler
- Scissors
- Chalk
- Sewing machine
- Brown thread
- Pinking shears
- 1 pair of stretchy black knit gloves (we used adult Magic Gloves)
- Needle
- Fiberfill
- Fabric glue (we used Fabri-Tac), optional
- 2 black buttons (pupils)
- 2 slightly larger white buttons (eyeballs)
- 1 large red pom-pom (nose)
- Instructions
-
-
Fold the fleece in half. Be sure that the stretch is horizontal and that the right sides are together. Cut 3 inches off the top of the fleece as shown. Set this strip aside for the ears. The remaining piece should now be 12 inches long. -
To create the rounded top of the hat, center a plate on the fleece and trace around it with chalk. Continue the line to the bottom of the fabric on both sides. Mark a point 4 inches up from the bottom on each side. Remove the plate. -
Starting and ending at the 4-inch marks, stitch the fabric together, following the chalk line (see dotted line). Use regular scissors to trim the fabric along the seam to 1/2 inch (see red line). Do not trim below the 4-inch mark. Use pinking shears to finish the bottom edge of the hat. -
Turn the hat right side out and stitch the remaining 4 inches to the bottom on each side. Trim the fabric along those seams to 1/2 inch and turn up the brim. -
Loosely stuff the glove antlers with fiberfill and hand-stitch the turned-in cuffs to the hat just in front of the side seams. -
Using the extra fabric from step 1, cut 2 leaf-shaped ears (ours are 2 1/2 by 3 1/2 inches each). Glue or sew 1 end to pinch it in as shown. Sew the ears in place on the hat. -
Sew the white buttons in place, then sew or glue the black buttons onto the white buttons. Glue or sew the pom-pom nose to the center of the brim. Let the glue on the hat dry for 24 hours.
-
- Tips:
- Laundry Instructions for hat:
- Place the hat in a pillowcase and knot the case closed.
- Wash in cold water on a gentle cycle with mild detergent.
- Lay the hat flat to dry.
- Place the hat in a pillowcase and knot the case closed.
- Find more about:












